Krown Manufacturing KBS300RX User Manual
Page 9
INSTALL KA300 FOR
MULTI-FAMILY HOME OR
HOTEL
There is one hotel code applied
for all KA300TX installed in
the hallway. The room code is
applied for each KA300TX in
each room.
With this set up, when there is
an alarm triggered from a local
fire alarm, the KA300RX
receiver and KBS300RX will
activate with channel one
LED indicator. If the
evacuating signal comes from
the hallway siren, the receivers
will activate and indicate
channel three LED.
Program the KA300RX
receiver to respond for either
room code or hotel code.
Important note:
Failing to install a transmitter in the hallway for the evacuation siren, may cause the receiver
to not respond to this signal. The range of the transmitter is 100 feet. The receiver will not
respond if the transmitter is out of range. It is recommend to install the transmitter at a 70
feet distance for the area covered.
1: HOW YOUR ALARM MONITOR KA300 WORKS (CONT.)
5