Kuppersbusch USA EEB 9800.0 - Manual (Page 8)

8
EEB 9800.0 USA
Using your oven
General Information
F A safety cut-out prevents the oven being accidentally left on for extended
periods. Once the maximum cooking time set has expired, the oven turns
off if operation has been continuous. If you want to use the oven for
longer, you will have to switch it on again for the remaining time. Please
see “Setting optional functions” on page 18 for how to set maximum
cooking time.
F After a few minutes operation, the knob is secured against unintentional
use. It must first be turned before it is re-activated and settings can be
re-adjusted.
F In some programes, the fan turns ON and OFF. This is intentional.
Explanation of the colored symbols.
F Not all programes and functions can be combined with one another.
Those that cannot be so combined cannot be selected, i.e. do not
illuminate.
F -<...>+ in the text display means: values can be changed using the knob.
Switching on the oven
– Touch the sensor key
i
.
The programe symbols illuminate green. The oven is ready for use and the
text display shows <select programe OK>.
– Select a programe.
F If you do not select a programe within 10 seconds, the oven will switch
off again.
Selecting a roasting programe
The oven is switched on, the text display shows <select programe ok>.
– Touch the sensor key with the symbol for the programe you wish to select.
The symbol illuminates red and the ”automatic weight system” blinks
green / red.
– Set the weight of the material to be cooked with the knob.
This setting governs cooking time and temperature.
– If you wish, change the predefined cooking time and cooking temperature.
– Now start the programe by touching
j
.
Selecting a baking programe
The oven is switched on, the text display shows <select programe ok>.
– Touch the sensor key with the symbol for the programe you wish to select.
The symbol lights up red.
Only baking programes Bread
Z
and fruit cake
X
:
– Select the sub-programe desired with the knob and confirm your choice by
touching
j
.
Only baking programes Bread
Z
:
– Set the weight of the material to be cooked with the knob.
This setting governs cooking time and temperature.
– If you wish, change the predefined cooking time and cooking temperature.
– Now start the programe by touching
j
.
All other baking programes:
– If you wish, change the predefined cooking time and cooking temperature.
– Now start the programe by touching
j
.
Select the heating programe
The oven is switched on, the text display shows <select programe ok>.
– Heating programes:
Touch the sensor key with the symbol for the programe you wish to select.
– If you wish, change the predefined cooking temperature.
– Cooking duration and end are not pre-set but can be input. (See ”Altering
/ Setting the cooking time” and ”Setting the finish time”).
– Now start the programe by touching
j
.
Altering the cooking temperature
Cooking temperature is pre-set in all programes and shown on the
temperature display.
When you select a baking and roasting programe, you can only alter the
cooking temperature within certain limits. The heating programes’ temperature
is in the range 32 °F / 0 °C (no temperature setting) to 555 °F / 290 °C and
freely selectable.
– Altering the cooking temperature: Turn knob.
Altering / Setting the cooking time
Cooking duration in the baking and frying programes is pre-set but
changeable. No cooking duration is pre-set in the heating programes.
– Touch the sensor key
u
: The text display shows, for example,
<Cooking time ok>.
– This time can be changed with the knob as desired.
– Confirm with
j
.
Setting the finish time
Cooking completion is the moment the oven is turned off.
F You can combine the cooking duration
u
and the cooking completion
n
. See ”Automatic turn-on and shut-off”.
– Touch the sensor key
n
: The display shows <set end of cook time ok>
or if the duration has already been chosen e.g. <end of cooking 13.24>.
– This time can be changed with the knob as desired.
– Confirm the modification with
j
.
Color Means
green symbol can be selected
red symbol is active
red / green symbol has to be set now
orange symbol is active but has been modified