How to use the mpx filter key, Bias level adjustment, Start recording – Kenwood CT-405 User Manual
Page 17
17
How to record (Deck B only)
÷ Recording will start.
÷ The deck enters the stop mode automatically when the tape has
been recorded till the end.
Press once.
4
Start recording.
1
Press the REC/ARM (
¶) key.
2
Play the music source from the begin-
ning.
How to use the MPX FILTER key
Depending on the tuner, a recorded FM broadcast may produce a
“beat” sound. In this case, press the MPX FILTER key before re-
cording. To cancel, press the MPX FILTER key again.
lights up
Use this function when recording a radio (FM) broadcasts.
¶
REC/ARM
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
-
ON
–
OFF
2
3
7
2
3
7
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
-
ON
–
OFF
2
3
7
2
3
7
MPX FILTER
÷ To adjust the bias level, play back the recorded sound and adjust to the
suitable level.Repeat if necessary.
÷ The bias can be adjusted to a value of ±3.
Bias level adjustment
The MODE key can be used to adjust the bias level.
lights up
1
Press the MODE key and select the "BIAS"
mode.
2
Adjust the bias level.
The high frequency
decreases.
The high frequency
increases.
Each press of the MODE key changes the setting.
1 “LEVEL” lights up: Recording level setting mode
2 “BAL.” lights up: Recording balance setting mode
3 “BIAS” lights up: Recording bias setting mode
4 “LEVEL”,“BAL.”, and “BIAS”go off: Counter display mode
MODE
REC LEVEL/BAL
/BIAS
MIN/L
MAX/R
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
-
ON
–
OFF
2
3
7
2
3
7
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
-
ON
–
OFF
2
3
7
2
3
7