Convenient cd recording (deck b only), Cd synchro recording, Preparation – Kenwood CT-405 User Manual
Page 20: Perform auto-bias adjustment
20
Start playing the CD.
Set the record-pause mode.
Adjust the recording level.
2
Press
7 key of the
CD player.
Press the
6 key
of the CD player.
1
Play a CD.
4
Put the CD player in stop
mode.
3
4
Press the
6 key of the CD player.
To pause
:
Press the
6 key of the CD player.
To restart recording
:
Press the
6 key of the CD player.
To stop
:
Press the
7 key of the CD player.
Preparation
÷ If the stop (7) key of the cassette deck is pressed, the cassette deck
enters the stop mode but the CD player does not stop.
CD synchro recording
÷ Synchro recording is not possible when tracks of more than one CD are
programmed using a Carrousel type CD player.
÷ Recording starts at this moment.
÷ When the CD player has completed playback, the cassette deck stops
recording and enters the stop mode.
Convenient CD recording (Deck B only)
By connecting this unit with a KENWOOD "
", type amplifier (receiver) with a SYSTEM CONTROL jack and a KENWOOD
CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on the CD player can
be started simultaneously.
Since this unit is not designed for recording with metal (TYPE IV) tapes, do not use metal tapes for recording.
1
Perform auto-bias adjustment.
÷ The optinum bias is set in about 50 seconds, after which the deck
enters stop mode.
÷For a fine adjustment after setting AUTO BIAS, refer to the description
of “Bias level adjustment”.
&
÷ To cancel the auto-bias adjustment operation in the middle, press the
stop (
7) key.
÷ Recording is possible even when the auto-bias setting is ommitted.
÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key.
1
Complete the connections referring to
"System connections".
6
2
Make “Playback (recording) preparation”.
0
3
(Load a disc in the CD player.)
2
Set the record-pause mode.
÷ While pressing the PAUSE (8)
key, press the REC/ARM (
¶) key.
3
Adjust the recording balance
and recording level.
“How to record.”
^
AUTO BIAS
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
-
ON
–
OFF
2
3
7
2
3
7
8
PAUSE
¶
REC/ARM
8
PAUSE
¶
REC/ARM
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
-
ON
–
OFF
2
3
7
2
3
7
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
-
ON
–
OFF
2
3
7
0
2
3
7
0
: Keys and control used in the operations described on this
page.