Kenwood CK 780 - Manual (Page 30)

30
SEMI - AUTOMATIC COOKING
This is used to switch the oven off auto-
matically after the desired cooking time
has elapsed.
There are two ways to set the semi-
automatic cooking function:
1. Set the length of the cooking time by
pushing the button and the but-
ton to advance, or to go backwards
(Fig. 6.7).
This sets the desired “stop” time.
or
2. Set the end of the cooking time by
pushing the button and the but-
ton to advance, or to go backwards
if you have passed the desired time
(Fig. 6.8).
AUTO and the symbol will be on.
Then set the temperature and the cook-
ing program (see the relevant sections).
The oven is switched on and it will
switch off automatically at the end of the
desired time.
During cooking, the
symbol remains
on and by pressing the button you
can see the time that remains until the
end of the cooking.
The cooking program can be can-
celled at any moment by pushing the
button.
At the end of the cooking, the oven and
the
symbol will turn off, the AUTO will
flash and a buzzer will go off which can
be stopped by pushing any of the but-
tons.
Turn the switch and temperature knobs
to "OFF" and put the programmer onto
“manual” by pressing the
button.
A
U
T
O
A
U
T
O
Fig. 6.7
Fig. 6.8