Kodak DCS500 - Manual (Page 106)

7-4
12 Select a drive mode (single or
continuous) or a self-timer mode
(2-second delay or 10-second
delay) by pressing the Drive
button then turning the Main
dial. Refer to “Changing the
Drive Mode” on page 10-3.
13 Set the ISO value by holding
down the AF Mode Selector and
the Metering Mode Selector
buttons and turning the Main
dial. Refer to “Setting the ISO”
on page 8-10.
14 Lightly press the Shutter
Release to wake the camera.