Kodak DCS500 - Manual (Page 37)

2-15
2
Y
o
u
r Cam
er
a
Using the Quick Control Dial
The Quick Control dial works in two different modes.
✔ When you use it in conjunction with the DISP/MENU button, the SELECT button,
or the W.BAL button, you can access digital functions through the Image Display
or the Back LCD panel.
✔ When you turn on the Quick Control Dial switch, and use the Quick Control dial
without one of the buttons mentioned above, you can access a variety of
non-digital functions (page 2-16).
☛
The Quick Control dial is disabled for a short period of time after each exposure. If
you change a camera setting with the dial immediately after capturing an image,
check that the camera responded appropriately.
Using the Quick Control Dial For Digital Functions
The Quick Control dial can access functions available through the Image Display or the
Back LCD panel when you use it in conjunction with one or more of the following
buttons:
✔ DISP/MENU button—Scroll through menu bar icons.
✔ SELECT button—Scroll through images or select menu options.
✔ W.BAL button—Select a White Balance option.
Press and hold one or more of the
buttons listed above and rotate the
Quick Control dial to access the
desired digital function.