KVH Industries KVH TracVision TracVision G6 User Manual
Page 15
Using the ADCU Interface
54-0161-01
15
3 – Using the ADCU
Interface
This section explains how to use some basic ADCU functions. You will
use the ADCU to operate, control, and monitor the TracVision G6 and
GyroTrac.
Contents
3.1
ADCU Interface Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.2
Setting Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
3.3
Selecting TracVision or GyroTrac-only Operations . . . . . . . . . . . . . . .19
3.4
Turning Sleep Mode On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
3.5
Installing a New Satellite Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3.6
Selecting Active Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22