3 connecting your system - what goes where, 3 connecting your system – what goes where – KRK ERGO User Manual

Page 12

Advertising
background image

12

AAddddiinngg aa SSuubbwwooooffeerr

Begin by determining the best location for your subwoofer. If

possible, the optimum set up would reflect that shown in Figure

3.2; however, this set up may not be practical, or possible, in

your room. Once you have set up your monitors, listen to

program material that you know contains low frequency

information. If your subwoofer has a phase switch, adjust the

subwoofer to provide the highest frequency setting possible. Flip

the switch back and forth to find the loudest setting. Then adjust

the sub’s low pass filter so that it works in conjunction with the

satellite’s high pass frequencies. When you have finished,

readjust the level of the sub. (Figure 3.2)

33..33

CCoonnnneeccttiinngg YYoouurr SSyysstteem

m—

—W

Whhaatt G

Gooeess W

Whheerree??

Now you get to plug things into ERGO. Plugging in audio

cables is always a rewarding experience, as the gratuitous

“thunk” of a cable seating into a jack provides a sense of

accomplishment, both aurally and tactically. So here are the

steps for hooking things up:

Make sure power is Off at your monitors/amplifier, computer,

and ERGO’s power switch is Off. This is an important step.

Please follow it to ensure things go smoothly.

1) Plug ERGO into your computer by connecting it to the

FireWire port. ERGO ships with a 6-pin FireWire cable that

supplies both power and data. If you are using a laptop that has

a 4-pin FireWire cable, you’ll need to dig up an adapter cable

to use ERGO.

2) Plug in ERGO’s Microphone adapter cable. This is the little

XLR to 1/4” TRS cable that shipped with ERGO.

3) Go into that box in the corner of your room and dig up your

best XLR mic cable. Make sure it is about the length of the longest

dimension of your room. Also make sure it is your BEST cable

and it is in working order. Plug this into the ERGO’s XLR-1/4”

adapter.

4) Plug in ERGO’s microphone into your best cable that you

installed in the previous step. Place the microphone in your best

microphone stand, you know, the one in the other corner of your

studio. Put this aside for the time being.

SSeettttiinngg UUpp aa SSyysstteem

m wwiitthh TTwwoo M

Moonniittoorrss aanndd O

Onnee SSuubb (Figure

3.3)

Subwoofer

Left

Right

Focus / Listening Position

33.. SSeettttiinngg uupp EERRG

GO

O aanndd yyoouurr M

Miixxiinngg EEnnvviirroonnm

meenntt

Figure 3.2

Figure 3.3

Advertising