2 calibration – KRK ERGO User Manual

Page 18

Advertising
background image

18

55..22

CCaalliibbrraattiioonn

SSppeeaakkeerr M

Mooddee

This window will inform you of which, if any, buttons are selected

on ERGO—A, B/Sub, both, or neither and will instruct you to

select the appropriate button. Click EEnntteerr to proceed. (Figure 5.4)

SSuubbwwooooffeerr M

Mooddee

If you chose to use ERGO in Subwoofer mode, the next window

gives you a thumbs up to proceed, or tells you to press any

required buttons. When given the prompt, click EEnntteerr. (Figure

5.5)

TTiipp To enable the Subwoofer mode, remember to open the

ERGO Control Panel and click A + SUB from the Speaker

Mode area.

Don’t be scared. Overwriting measurements helps ERGO clear

its thoughts and prepares it to take new measurements.

Selecting CANCEL sends you to the initial window. If there is

something you want to reconfigure at this point, then select

CANCEL. If not, click EEnntteerr to continue. (Figure 5.6)

This pretty much speaks for itself. (Figure 5.7)

55.. EERRG

GO

O CCaalliibbrraattiioonn SSooffttwwaarree ((EERRG

GO

O CCaall))

Figure 5.4

Figure 5.5

Figure 5.6

Figure 5.7

Advertising