Accessories, Channel space setting, Unpacking – Kenwood XD-DV75 User Manual

Page 3: Preparations

Advertising
background image

3

Preparations

XD-DV series (EN/K,M,T,X,Y)/2

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.

Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit

was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can

file a claim against the carrier for shipping damage.

We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

Please confirm that the following accessories are present.

FM indoor antenna (1)

Loop antenna (1)

Remote control unit (1)

Batteries (R6/AA) (2)

*AC plug adaptor (1)

* Use to adapt the plug on

the power cord to the
shape of the wall outlet.
(Accessory only for re-
gions where use is nec-
essary.)

/

Video cord (1)

System

Front speakers (Left and right speakers)

Surround Speakers and accessories

XD-DV95

LS-N90V (For Europe and U.K.)

CRS-N90V (Center speaker

×

1, surround speakers

×

2,

LS-N95V (For other countries)

speaker cords

×

3, speaker stabilizer

×

12)

XD-DV85/80

LS-N70V

CRS-N90V (Center speaker

×

1, surround speakers

×

2,

speaker cords

×

3, speaker stabilizer

×

12)

XD-DV75

LS-N90V

XD-DV65

LS-N70V

XD-DV55

LS-N50V

XD-A950DV

LS-N70V

CRS-N90V (Center speaker

×

1, surround speakers

×

2,

speaker cords

×

3, speaker stabilizer

×

12)

The space between radio channels has been set to the one
that prevails in the area to which the system is shipped.
However, if the current channel space setting does not
match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in
the following table or vice versa, proper reception of AM/FM
broadcasts cannot be expected. In this case, change the
channel space setting in accordance with your area by refer-
ring to the following table.

(Except for the U.S.A., Canada, U.K., Europe and Australia)

CHANNEL

SPACE frequency

Area

1

2

USA, Canada and South
American countries

Other countries

FM : 100 kHz
AM : 10 kHz

FM : 50 kHz
AM :

9 kHz

Setting the CHANNEL SPACE

1 Set the POWER key to standby (power off) mode.

2 Press and hold the STOP (7

7

7

7

7) key for more than 2 seconds.

Each press for more than 2 seconds switches the modes
as follows.

1

“FM100/AM10 kHz” STEP

2

“FM 50 /AM 9 kHz” STEP

STOP

7

CHANNEL SPACE setting

Accessories packed with the main unit

Speaker model names and accessories packed with the speakers

Model Name of Remote control

Model Name System

Areas

RC-DV90E

XD-DV95/DV85/DV-75/

DV65/DV55

Europ and U.K.

XD-A950DV/XD-DV95/

U.S,A, Canada, Australia

RC-DV90

DV85/DV-75/DV65/DV55 and U.S. military

XD-DV95/DV85

Other countries

RC-DV90M

XD-DV75/DV65/DV55

Other countries

Advertising
This manual is related to the following products: