Kompernass KH 2264 User Manual

Page 8

Advertising
background image

7

t

When the desired memory number appears

on the display ...
ൺ hold the MEMORY button depressed

until the "MEMORY" indicator stops flas-

hing. The channel is now stored.

Already occupied memory positions can be

renewed at will.

5.4 Stored channels

Call up

When in the normal reception mode you

can browse through the 15 stored channels

by ...
ൿ pressing the M-UP button. The channels

are activated one after the other.

Note: The channels are saved for a few

minutes in the event of a power cut, or

when changing the batteries. If the device

goes without power for a longer time peri-

od, then the memory positions will be lost.

6.

CD mode

When this function is selected, you can

listen to normal Audio CDs, as well as CD-

R/RW recorded in audio format.
൵ Select the "CD" FUNCTION switch.

6.1 Inserting / extracting a CD

Keep the CD drive closed unless you are

inserting or removing a CD to prevent dust

from penetrating the device.
൷ Apply gentle pressure to the CD drive
until you can hear it unlock and it opens

automatically.

• You can now insert the CD with the prin

ted side facing upwards.

The CD is ready for playing when the dis-

play shows the number of tracks on the CD,

and the total playing time.

The CD is not ready for playing as long as

the word "disc" is displayed. If this continu-

es for some time, then the CD cannot be

read correctly - check that the CD has been

inserted the right way round and it is in

good condition.

6.2 Play / Pause

If you press PLAY / PAUSE ...

For a short time, the CD will start. The

display shows the track number and

track length of the track being played.

Press again while a track is being played

to pause playback immediately, press

again to continue playing the track from

the position was paused.

6.3 Track selection / fast for-
ward

ൻ If you press SKIP >>|
ർ or SKIP |<< ...

briefly, you jump one track up or

down.

hold the button pressed to scan

through the track forwards or back-

wards (fast forward/backwards).

6.4 Stop

ൾ If you press STOP ■ ...

Once, the CD stops playing the current

track.

Twice, the programmed track list is ele-

ted as described in chapter 6.5

.

KH2264_LB4_UK 17.11.2003 14:13 Uhr Seite 8

Advertising