Kenwood MD-MT877W - Manual (Page 10)

10
Important Introduction
–
Battery Charger
–
Battery Charger
There are two different ways to use the battery charger one is to use it as a normal battery charger, the
other is to use it with an AC adaptor by attaching the portable MD to the battery charger.
1. Remote Control Holder (11)
(You can hang the remote control on it.)
2. Lock Detector
3. Hook For Fixing The Main Unit
4. Charge/Operation Switch (11)
5. Stand
6. AC Adaptor Connecting Socket (18, 19)
Names Setting
CHARGE
OPERATION
1
2
3
4
● Before setting the portable MD to the battery charger, make
sure the battery charger is in charge mode (CHARGE). If you
insert the portable MD by force whilst in operation mode
(OPERATION), the hook for fixing the portable MD may break.
● Operating whilst in charge mode, “CHARGEmode” will appear
and no operation is possible.
Face the top
toward you.
Caution:
Charge
mode
1
4
5
6
3
2
CHARGE
OPERATION