Specifications, References – Kenwood MD-MT877W User Manual
Page 58
58
References
–
Specifications
–
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some devia-
tions from these values in individual units.
Power source
DC 1.2V:
Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
DC 5V:
AC adaptor (AC 110 - 240V, 50/60 Hz)
DC 1.5V:
Commercially available, “AA” size (LR6), alkaline battery x 1
DC 1.5V:
Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-
tive earth electrical system) (Used with separately available plug adaptor (AD-
M66PA))
Power consumption 0.15A (AC adaptor)
Output power
RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Charging time
Approx. 3.5 hours
Input sensitivity
MIC H:
reference input level
0.25 mV
input impedance
10 k ohms
MIC L:
reference input level
2.5 mV
input impedance
10 k ohms
LINE:
reference input level
100 mV
input impedance
20 k ohms
Output level
Earphones:
maximum output level 5 mW + 5 mW
load impedance
32 ohms
LINE:
specified output
250 mV (-12 dB)
load impedance
10 k ohms
Dimensions
Width:
71.9 mm (2-27/32”) Height: 16.8 mm (11/16”)
Depth: 78.7 mm (3-1/8”)
Weight
131 g (0.29 lbs.) with rechargeable battery
Input socket
Line/optical digital, microphone (powered by the main unit)
Output socket
Earphones (impedance: 32 ohms)/remote control unit
Type
Portable MiniDisc recorder
Signal readout
Non-contact, 3-beam semi-conductor laser pick-up
Audio channels
Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response 20 – 20,000 Hz (
±
3 dB)