Battery installation – Kawasaki KFX NINJA K0450 User Manual

Page 15

Advertising
background image

J8472pr-0920

15

IMPORTANT! Use only a Power Wheels

®

12 volt lead-acid

rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least 18 hours
using the enclosed Power Wheels

®

12 volt charger before operating

your vehicle for the first time. Charge the battery for at least
14 hours after each use of the vehicle. Never charge the battery
longer than 30 hours. Failure to follow these instructions may
damage your battery and will void your warranty.

• Press the tab under the back edge of the seat and lift to remove

the seat.

• Lift the battery retainer to access the battery compartment.
• Place the battery upright in the battery compartment.
• Plug the motor harness connector into the battery. Push firmly.

Power Wheels

®

12 Volt Battery

Motor Harness

Connector

• Carefully lower the battery into the battery compartment.

The battery retainer slides over the battery to secure it.

BATTERY INSTALLATION

1

2

3

Seat

4

Battery Retainer

Battery

Retainer

• Fit the tab at the front of the seat into the slot near the drive

buttons

A

.

“Snap” the tab at the back of the seat into the slot near the rear of

the vehicle

B

.

Seat

Drive Buttons

A

B

Advertising
This manual is related to the following products: