Warning, Assembly – Kawasaki KFX NINJA K0450 User Manual

Page 8

Advertising
background image

J8472pr-0920

8

Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should
not handle parts, including the battery,
or help in assembly of the vehicle.

WARNING

• Fit a cotter pin into the hole near one end of the rear axle.

• Plug the charger connector into the battery

A

.

• Plug the charger into a standard wall outlet

B

.

Notes:
- Use the charger only in a wall outlet. Do not plug the AC adaptor

into a ceiling outlet.

- If power flow to the wall outlet is controlled by a switch, make

sure the switch is “ON”.

• Before first-time use, charge the battery for at least 18 hours.

Never charge the battery longer than 30 hours.

• Recharge the battery for at least 14 hours after each use of your

vehicle. Do not charge the battery longer than 30 hours.

• Once the battery is charged, disconnect the charger connector from

the battery. Unplug the charger from the wall outlet. The battery is
now ready to be installed in your vehicle. Please see the Battery
Installation section on page 15 for detailed instructions on installing
your battery. If your battery is already installed in your vehicle, simply
re-connect the motor harness connector to the battery.

Battery

Charger

Connector

1

ASSEMBLY

A

B

Rear Axle

Cotter Pin

Advertising
This manual is related to the following products: