Konica Minolta NS-42E570A11 - Manual (Page 11)

7
Insignia 42"/46" LED-LCD TV, 120Hz 1080p
www.insigniaproducts.com
Side Remote control
# Item Description
AUDIO OUT
Connect an external sound system to these jacks. For
more information, see “Connecting an analog sound
system” on page 13.
(headphone)
Connect headphones to this jack. For more
information, see “Connecting headphones” on
page 12.
USB
Connect a USB device, such as USB flash drive, to this
jack.
HDMI1/HDMI2/
HDMI3/HDMI4
Connect an HDMI devices to these jacks. An HDMI
cable carries both video and sound. You do not need to
make an audio connection for an HDMI device.
For more information, see “Connecting an HDMI
device” on page 11.
When connecting a DVI device using an HDMI-DVI
adapter, connect the device to the HDMI1 jack.
SPDIF
Connect an audio amplifier to this jack. For more
information, see “Connecting a digital sound system”
on page 12.
1
2
3
4
5
# Item Description
(power)
Press to turn your TV on or off (Standby mode). When
your TV is off, power still flows into it. To disconnect
power, unplug the power cord.
INPUT
Press to open the Source List, then press or to
cycle through the available input sources. For more
information, see “Selecting the video input source” on
page 14.
AUDIO
Press to select SRS, Bass, Treble, Balance, or Reset
Audio Settings. For more information, see
“Adjusting sound settings” on page 19.
DYN VOL
Press to select the level of Audyssey Dynamic Volume.
You can select Heavy, Medium, Light, or Off. For
information see “Adjusting sound settings” on
page 19.
Numbers
Press to enter channel numbers and the parental
control password.
—
Press to enter a digital sub-channel number. For more
information, see “Selecting a channel” on page 15.
MUTE
Press to mute the sound. Press again to restore the
sound.
VOL+/VOL– Press to increase or decrease the volume.
FAV
Press to open the Favorite Channel list. For more
information, see “Setting up a favorite channel list” on
page 21.
1
2
3
4
5
6
7
8
9