Proper use, Items supplied, Technical data – Kompernass TOUCH IT KH 4113 User Manual

Page 4: Controls, Select a suitable installation site, Preparing the table lamp for use, Using the table lamp

Advertising
background image

Note:

For damage resulting from …
• opening of the table lamp base / the transformer

housing

• attempted repairs made by non-qualified personnel
• improper use of the table lamp

no liability/warranty is accepted!

2. Proper Use

The table lamp is intended exclusively …

• as an illumination and decorative object for interior

rooms (no damp rooms)

• for domestic, non-commercial use.

3. Items supplied

Table lamp
Operating instructions

4. Technical data

Power supply:

230-240 V ~ 50Hz

Power consumption :

40 W

Bulb:

40W 230V E14

Protection class:

II

5. Controls

1 Bulb (not supplied)
2 Lamp shade
3 Socket
4 Base with touch sensor as on/off switch

and dimmer

5 Power cable
6 Covering cap (KH4113 only)

6. Select a suitable

installation site

Always place the table lamp on a solid, level, slip-
proof surface.
To avoid malfunctioning, do not place the table
lamp on metallic surfaces.

Do not place any easily inflammable/combustible
materials in the immediate vicinity of the table lamp
while it is switched on. Do not cover the table lamp
while it is switched on. Also, do not hang any ob-
jects over the table lamp.
Do not place the table lamp on metallic objects.

Otherwise there is a risk of a
short-circuit or fire!

7. Preparing the table lamp

for use

1. Carefully remove the table lamp from the packa-

ging.

2. KH 4112/KH 4114: Screw the light bulb 1

(not supplied) into the bulb holder 3.

3. KH 4113: Carefully remove the lampshade 2

upwards from the table lamp. Loosen the cove-
ring cap 6 from the table lamp. Screw the bulb
1 (not supplied) into the bulb socket 3. Repla-
ce the lampshade 2 back onto the table lamp.
Secure it with the help of the covering cap 6.

4. Unwind the power cable 5 to its full length.

Insert the power cable 5 into a power plug.

The table lamp is now ready for use.

8. Using the table lamp

• Switch the table lamp on by touching the base 4

with a finger (KH4113: touch the base 4 or the
stand).The table lamp now lights up at the lowest
brightness level.

- 2 -

IB_KH4112_14_33345_LB6 10.06.2009 14:42 Uhr Seite 2

Advertising
This manual is related to the following products: