Kohler CFI230J - Manual (Page 3)

26 CFI230J 3 CFI230J
Introduction
The following pages aim to provide comprehensive installation instructions, plus
advice on how to care and maintain your product.
We recommend that the unit is installed by a qualified Plumber or Engineer.
Please retain this document for future reference.
Note: Due to our desire to always improve our products, Daryl reserve the right to
change specification without prior notice
Safety Precautions
We strongly recommend that all glass panels are moved by a minimum of two
people and that protective packaging along the glass edges is kept in place for
as long as possible to prevent damage before installation
Wear protective
footwear when
lifting panels Wear Safety
glasses when
drilling
Care & Maintenance
The unit should be cleaned regularly.
Use a non abrasive cleaner (ideally with a pH
value of 4 to 8) applied with a soft cloth.
Under no circumstances should scourers or
powerful detegents be used as these can damage
the metallic surface of the frame and also tarnish
the glass coating.
If fitted correctly the unit should not require any
maintenance other than cleaning. If problems do
occur contact the Daryl Technical Helpline
Tel: 0151 606 5000
People not familiar with the fitting of Daryl Products may require
the assistance from another person at certain stages of the
procedure. We have indicated these points in the process with
the Caution Symbol.
Caution
Caution: Care should be taken when drilling into walls and floors to avoid any
hidden pipes or wires.
Fit top cap - Water delivery side
C
C
C
Fit top cap - Non Water delivery side
STEP
47
STEP
46
STEP
48
Fit the door seal to the back edge of the door.
When the door is closed the edge of the seal
should touch the side panel along it’s length.
STEP
49
Apply a thin bead of sealant along the outside
edge of the wall channels.
24hrs
Do not use the enclosure for
at least 24 hours.