Kohler Builder Portfoilio Whirlpool baths K-1215-AC - Manual (Page 24)

24 106548- CA (9437) Kohler Co., Kohler WI
18. COMPLETE INSTALLATION
INSTALL HANDLES AND SPOUT
After the deck is finished, attach the handles and spout
to complete faucet installation per manufacturer’s
instructions.
19. CLEAN-UP AFTER INSTALLATION
When cleaning up after installation, do not use
abrasive cleaners as they may scratch and dull the
module surface. Use warm water and one of the liquid
detergents to clean the surface. Stubborn stains, paint, or tar can be removed with
turpentine or paint thinner. Do not allow cleaners
containing petroleum distillates to remain in
contact with whirlpool surfaces for long periods of
time. Plaster can be removed by scraping with a wood
edge. Do not use metal scrapers, wire brushes, or other
metal tools. One of the powder-type detergents may be
used on a damp cloth to provide mild abrasive action to
the residual plaster.