Konica Minolta NS-42L550A11 - Manual (Page 19)

15
32"/37"/42"/46" LCD, 120 Hz 1080p
www.insigniaproducts.com
Connecting an HDMI device
To connect an HDMI device:
1 Make sure that your TV’s power cord is
unplugged and the HDMI device is turned off.
2 Connect an HDMI cable (not provided) to the
HDMI 1, HDMI 2, HDMI 3, or HDMI 4 jack on
the side of your TV and to the HDMI OUT jack
on the HDMI device.
3 Turn on your TV, then turn on the HDMI device.
4 Press INPUT to open the Source List.
5 Press or to highlight HDMI 1, HDMI 2,
HDMI 3, or HDMI 4, then press OK/ENTER.
Connecting a component video device
To connect a component video device:
1 Make sure that your TV’s power cord is
unplugged and the component video device is
turned off.
2 Connect a component video cable to the
COMPONENT Y/P B /P R jacks on the back of your
TV and to the COMPONENT OUT video jacks on
the component video device.
3 Connect an audio cable to the
COMPONENT L/R audio jacks on the back of
your TV and to the COMPONENT AUDIO OUT
jacks on the component video device.
4 Turn on your TV, then turn on the component
video device.
5 Press INPUT to open the Source List.
6 Press or to highlight COMPONENT, then
press OK/ENTER.
Note
If your device has an HDMI connection, we
recommend that you use the HDMI connection to
get the best quality possible.
Notes
To connect a DVI device, you need an HDMI-DVI
adapter (not included) and a 3.5 mm audio cable (not
included). Connect the adapter to the DVI device and
the HDMI 1 jack on the side of your TV. Connect the
audio cable to the DVI device and to the
PC/DVI AUDIO IN jack on the back of your TV.
Side of TV
HDMI device
Back of TV Component video device
NS-32_37_42_46_550A11_10-0465_MAN_V4_English.book Page 15 Friday, April 9, 2010 2:47 PM