Kenwood NEXEDGE NX-200 - Manual (Page 22)

3
d
iSplAy
Indicator Description
Appears when the Monitor or Squelch Off function
is activated.
Blinks when signaling of an incoming call matches
the Optional Signaling set up on your transceiver.
Appears when the current zone (left icon) or
CH/GID (right icon) is added to the scanning
sequence.
Appears when you are using Scan mode. Blinks
while paused at a channel.
Appears when there is a message stored in the
transceiver memory. Blinks when a new message
has arrived.
Appears when the current channel is programmed
as a Priority channel. “ ” represents Priority
channel . “ ” represents Priority channel 2. “ ”
represents priority channels  and 2.
Appears when the Operator Selectable Tone (OST)
function is activated.
Appears when the call is a Telephone ID call.
Blinks when Auto Telphone search is activated.
(The location of this icon is the same as the OST
icon.)