Kenwood NEXEDGE NX-200 - Manual (Page 5)


P
recautions
• Do not charge the transcever and battery pack when they are wet.
• Ensure that there are no metallc tems located between the
transcever and the battery pack.
• Do not use optons not specfed by Kenwood.
• If the de-cast chasss or other transcever part s damaged, do not
touch the damaged parts.
• If a headset or headphone s connected to the transcever, reduce
the transcever volume. Pay attenton to the volume level when
turnng the squelch off.
• Do not place the mcrophone cable around your neck whle near
machnery that may catch the cable.
• Do not place the transcever on unstable surfaces.
• Ensure that the end of the antenna does not touch your eyes.
• When the transcever s used for transmsson for many hours, the
radator and chasss wll become hot. Do not touch these locatons
when replacng the battery pack.
• Do not mmerse the transcever n water.
• When water gets nto the mcrophone openng or the speaker
grll, the voce level may become ncoherent or dstorted. Lghtly
shake the transcever to remove the water from the speaker and/or
mcrophone before operatng the transcever.
• Always swtch the transcever power off before nstallng optonal
accessores.