The soft buttons in midi mode, Program change (prgchg), Reset channels (rsetch) – Kurzweil KSP8 TM User Manual

Page 81: Panic, The soft buttons in midi mode -11

Advertising
background image

MIDI Mode

The Soft Buttons in MIDI Mode

Preliminary - Subject to Change

10-11

The Soft Buttons in MIDI Mode

The first three soft buttons select the three MIDI mode pages. The PrgChg soft button lets you
send a program change command on any MIDI channel. The RsetCh soft button lets you return
all channel parameters to their default values. The Panic soft button sends an All Notes Off and
an All Controllers Off messages to the PC3 and on all 16 MIDI channels.

Program Change (PrgChg)

When you press this soft button, a dialog appears that lets you send program changes out the
MIDI Out port, but does not change internal programs. The Chan/Layer buttons, the Up/Down
cursor buttons, and the Chan– and Chan+ soft buttons can all be used to change the channel on
which the program change command will be sent. The Left/Right cursor buttons, the Plus/
Minus

buttons, the Alpha Wheel and the Prog– and Prog+ soft buttons can all be used to change

the program change number that will be sent. When you’ve set the channel and the program
change number, press the Send soft button to send the program change command. Or press the
Cancel

soft button if you don’t want to send it. You can change the channel and the program

number as many times as you want before you press Send. You also can use the alphanumeric
pad to select a program number directly.

Reset Channels (RsetCh)

When you press this soft button, the PC3 asks if you want to reset all channels. If you press Yes,
all settings on the CHANNELS page will return to their default values. For example, you may
have set several MIDI channels to route their audio to Output Group B for a special project.
When the project’s over, you can reset the Channels to restore the audio routing to each
individual program (a value of Prog), rather than selecting each channel’s page and setting the
Pair parameter back to a value of Prog. Press No if you decide not to reset the channels.

Panic

Panic

sends All Notes Off and All Controllers Off messages to the PC3 and all MIDI channels.

Advertising