Kenmore 125.15884801 User Manual

Page 11

background image


Heat Resistant

Step 13

Mount the door handle with two
M4 X 25 mm bolts and two heat resistant
washers. Insert each bolt through the door
from the inside. From the outside place a
heat resistant washer over each bolt. Then
thread the bolts into the handle. Tighten
each bolt securely.

Step 14

Insert the temperature gauge with bezel
through the mounting hole in the front of the
door. Place a wing nut onto the temperature
gauge stem from the inside of the door
panel and tighten it firmly.