Kenwood KTC-H2A1 User Manual

Page 15

Advertising
background image

amount of time you want Here

2

Anywhere to play before it shuts off.

4. Press the SELECT button to confirm your selection and activate the Sleep Timer.
When the Sleep Timer is active, the display will return to the Normal Operation screen.
• The display will appear as normal except that every three seconds the timer countdown will replace the

stream number. You can still change streams and display modes as normal without shutting the timer off.

To cancel the Sleep Timer, turn Here

2

Anywhere’s power off, then turn it back on again.

Channel Skip/Lock

This allows you to select streams that you want to skip when scanning up and down the Channel List and

Category List screens, or simply when you’re pressing the cursor up & down buttons.
1. While in the Setup Mode, press the left or right arrow

button until the Channel Skip screen appears (right).

2. Use the up & down arrow buttons to highlight the

stream you want. (The highlighted stream will

automatically play.)

3. Press the SELECT button to change the highlighted

stream’s status from “available” (+) to “skip” (–).

• To exit the Channel Skip function, press the left or right arrow button. The screen will display the next

Setup Menu item.

You can further lock a stream by placing it in the Channel Lock mode. Locked streams will be unavailable

during all tuning modes, and cannot be directly accessed via the remote control.

Here

2

Anywhere Instruction Manual (ver. 2)

29

15, 30 or 60 minutes). This is especially useful if your vehicle’s cigarette lighter remains powered after the

ignition has been turned off.
1. While in the Setup Mode, press the left or right arrow button until the Auto Shutoff Setup screen appears (below).
2. Press the up or down arrow buttons until the display

shows amount of time you want Here

2

Anywhere to

stay on after the last time a button is pressed before

it automatically shuts off.

• When Auto Shutoff is activated, a ‘beep’ will sound and

the screen will display a countdown warning 10 sec-

onds before Here

2

Anywhere shuts itself off. Pressing

any button during this countdown will cancel the Auto Shutoff process and restore normal operation.

3. Press the POWER button to exit.

Sleep Timer

You can program Here

2

Anywhere to play for 30 or 60 minutes and then automatically turn itself off.

Note: You must re-set the Sleep Timer each time you want to use it.
1. While listening to SIRIUS, press the SELECT button to

enter the Stream List mode (see page 18).

2. Hold the left arrow button for at least 1 second. The

Timer Setup screen will appear (right).

3. Press the left or right arrow button to highlight the

Here

2

Anywhere Instruction Manual (ver. 2)

28

Timer Setup Screen

Channel Skip Screen

Auto Shutoff Setup Screen

Advertising