Konica Minolta 7020 - Manual (Page 36)

36
With this function you can shift the image left or right by up to
250 mm, e.g. to create a filing margin. You can also shift and
reduce the image at the same time, so that no portion of the
image is lost at the opposite edge.
– Press the required function key.
– For Image Shift, now use the arrows to define the margin
width for the front page and the back page, if you want to
produce double-sided copies.
– For a left margin (filing margin) on the front page, enter positi-
ve values. If you enter negative values (e.g -25 mm), the front
page margin will be created on the right. On the back page,
the margin is always opposite, i.e. on the right with positive
values, on the left with negative values.
– In the Reduce & Shift function, the specified margin is
created on the front and the back of the page. At the same
time the image is reduced in relation to the margin width, so
that nothing is cut off at the opposite edge.
9.1.4 Image Shift
9. Special Functions
This function lets you fill the copy with repeated small motifs or
a defined portion of an original.
9.1.5 Image Repeat
– Press the function key to call up the display on the left. If you
select AUTO, the Non Image Area Erase function is also
active. The original is repeated as often as possible on the
copy.
– Position the original on the platen glass and, in this case, leave
the RADF * open.
* Option