Konica Minolta 7020 - Manual (Page 40)

40
9.2.2 OHP Function
This function allows copying onto OHP films as well as automatic
insertion of blank or copied sheets into the set of transparencies.
– OHP films can only be fed via the Multi-Sheet Bypass. They
should not be placed on top of paper. Empty the bypass tray
before inserting the transparencies.
– Only A4 size is possible.
– Copy preselection is fixed to one (1) copy.
– Position originals in the RADF * . If you want to position your
originals on the platen glass, select the Store Mode and scan
each original by pressing the SCAN key.
OHP
Each original is copied onto an OHP film.
OHP films with blank interleaves
Each original is copied onto an OHP film. Blank interleaves and
copied OHP films exit alternatingly.
OHP films with copied interleaves
Each original is copied onto paper and onto an OHP film. Copied
interleaves and copied OHP films exit alternatingly.
When duplex copying, you can use this function to start each
new chapter on a right (front) page. Up to 15 positions can be
specified for chapter beginnings, with page numbers up to 999.
This function is only possible in combination with duplex copying
1
3 2 or 2 3 2.
Chapter can be combined with the Booklet function. Or special
(e.g. coloured) paper can be selected for the specified pages; this
paper is then fed from the sheet insertion tray.
9.2.3 Chapter
– Select the function and use the keypad, to enter page num-
bers for front pages. The first entry should be an even page
number.
– Press SET after each entry. If you want to change an entry,
press DELETE.
– After entering all required page numbers, confirm by pressing
OK, until you have returned to the Basic screen.
– 1 3 2 is automatically selected. Change this to 2 3 2 for
double-sided originals; and make further required selections.
– Position originals in the RADF * . If you want to position your
originals on the platen glass, select the Store Mode and scan
each original by pressing the SCAN key.
8
4
6
2
5
1
8
1
7
6
5
4
3
2
Front Pages
Copies Originals
7
3
9. Special Functions
* Option