Kohler Discovery - Manual (Page 11)

11
Installation Methods
The Discovery Thermostatic Shower Control
can be installed using Rear Fixing Points
on the Body, or by using the Securing
Brackets (supplied) on the Front Face of a
Solid Wall or Stud Partition, or on the Rear
Face of a Laminated Panel.
For installation from the front face into a
Solid Wall or Stud Partition using the
Securing Brackets, go to section:
‘Installation, 1. Solid Wall or Stud
Partition (Using Securing Brackets -
Mounting off Front Face)’.
For installation from the front face into a
Solid Wall or Stud Partition using the Rear
Fixing Points, go to section: ‘Installation,
2. Solid Wall or Stud Partition (Using
Rear Fixing Points on Shower Control)’.
For installation behind a Laminated Panel
using the Securing Brackets, go to section:
‘Installation, 3. Laminated Panel (Using
Securing Brackets - Mounting off Rear
Face)’.
Warning! Bottom bracket not
to be drilled or screwed to.