Krown Manufacturing K-EQ40 - Manual (Page 6)

4. Plug one end of the supplied short telephone line cord into the jack on the
back of the base.
5. Plug the other end of the cord into the wall plate.
6. Fit the hole slots over the wall plate studs and slide the phone downward
to secure it. (Figure 3)
7. Before you hang up the phoneʼs handset, slide up the handset holder to
remove it (see Figure 4). Turn over the handset holder so its tabbed edge
faces up, and then slide it back down into its slot.
Figure 3
Handset Holder
Figure 4
4