Kambrook KSG220 - Manual (Page 9)

9
Care, Cleaning and Storage
Cleaning
Before cleaning, switch the power off
at the power point and then unplug
the power cord.
Allow the Sandwich Press to cool
slightly. The Sandwich Press is easier to
clean when slightly warm.
Always clean your Sandwich Press
after each use to prevent a build up
of baked-on foods.
Wipe cooking plates with a soft
damp cloth to remove food residue.
To remove baked-on food residue,
squeeze some hot water over the
food residue then clean with a non-
abrasive, soft scouring pad. Wipe
clean and dry thoroughly with a soft
clean, cloth.
NOTE: The cooking plates have
a non-stick coating. Do not use
abrasives or metal utensils to
remove food residue as they
will scratch and damage the
coating.
NOTE: Do not use spray-on
non-stick cooking sprays or
oils as these may affect the
performance of the non-stick
surface on the cooking plates.
WARNING: do not
immerse any part
of your Kambrook
Sandwich Press in water
or any other liquid.
Storage
Switch the Sandwich Press off at the
power point and unplug the power
cord from the power point. Allow to
cool completely.
Follow cleaning instructions and
ensure appliance is completely dry.
Lock the storage clip along the side
arm towards the front handle of the
Sandwich Press so that the top and
bottom cooking plates are locked
together (see Fig.2).
Wrap the power cord around the
cord storage area underneath the
appliance.
Store the Sandwich Press on a flat, dry
level surface. Do not place anything
on top of the Sandwich Press.
Fig. 2