Kenwood DV-5700 - Manual (Page 40)

Applied Operations
40
Chapter 5: Applied Operations
7 . Select Play in the screen using the joystick, then press
ENTER to start program playback.
¶ When the mode switch of the joystick remote is
set to the Blue position and ¢ is pressed, the
current track is skipped and the next track in the
program will be played.
¶ Even when a disc is changed during programming,
the program playback plays the disc and track
numbers as registered with the previous disc. In
this case, the programming should be restarted
from the beginning.
Checking the program
Set the mode switch of the joystick remote to the
Purple position and press
¡
CHECK
C during program
playback.
¶ The program list is displayed on the TV screen.
When a program number is selected by tilting the
joystick up or down and the ENTER button is
pressed, program playback starts from the selected
program number. The contents of the program
numbers are also shown on the player display. (A
program number can also be selected by pressing
the CHECK button to move the cursor in the
program list.)
¶ When 17 or more tracks are programmed, the
program list is displayed in more than one page.
In this case, when the cursor is located on the
bottom edge, tilting the joystick downward makes
it possible to advance to the next page. (When the
cursor is located on the top edge, tilting the cursor
upward makes it possible to return to the previous
page.)
Disc Random Playback
Tracks in a desired disc can be played back in a random
order. (Disc random playback is not available with DVD
VIDEO, MP3 disc.)
1. Set the mode switch of the joystick remote to the
Orange position.
2. While the player is in stop mode, press
SQ.MODE
P.MODE
TOP MENU
/FOLDER S.
repeatedly until the player enters the disc random
mode.
DISC RANDOM MODE
DISC NO.
Press P.MODE to ALL RANDOM MODE
1 3 2 5 4
¶ When the player enters the disc random mode, the
screen as shown in the figure appears and the
"RANDOM" indicator in the display lights to
indicate that the player is in the disc random mode.
3. Select the disc by tilting the joystick to the left or right,
then press ENTER to start disc random playback.
¶ Disc random playback can also be started by
pressing the 3 PLAY button.
Clearing the program
1. Perform operations in steps 1 and 2 of the procedure in
"Registering and playing the program".·
2. Move the cursor to Last Clear or
All Clear
in the
screen, then press ENTER .
¶ Every time "Last Clear" is selected, the last track
in the program list is cleared. (The program can
also be cleared by pressing the C button.)
¶ When "All Clear" is selected, all tracks in the entire
program list are cleared.
Stopping program playback
Perform operations in steps 1 and 2 of the procedure
in "Registering and playing the program", then
press
SQ.MODE
P.MODE
TOP MENU
/FOLDER S. repeatedly until the player enters normal
play mode (track mode).·
¶ The "PGM" indicator turns off