Kenwood DV-5700 - Manual (Page 46)

V
arious Setups
46
Chapter 6: Various Setups
When "MAIN" is selected in "SET UP MENU":
The setups according to the connected TV, viewing
restriction, DVD VIDEO mode, OSD position, on-screen
messages and IPB display can be set.
OSD Position 7 Normal
On Screen Message 7 On
IPB Display 7 Off
MAIN
EXIT MENU
7 Level 8
TV Aspect
TV Mode
TV Monitor Type
7 4:3
7 Letterbox
7 Standard
7 Off DVD VIDEO Mode
Rating
"Rating" Settingu
¶ Sets the viewing restriction of DVD VIDEO. (This
functions only with DVD VIDEO discs compatible
with viewing restriction.)
"TV Aspect" Settingo
¶ Sets the picture aspect ratio according to that of
the connected TV.
"TV Mode" Settingo
¶ This setting is required when the aspect ratio of
the connected TV is 4:3.
"TV Monitor Type" Settingp
¶ Set this item according to the format of the
connected TV or video monitor.
"DVD VIDEO Mode" SettingQ
¶ Sets the play mode of DVD discs.
"OSD Position" SettingQ
¶ Sets the position of the OSD (On-Screen Display).
"On Screen Message" SettingW
¶ Switches the on-screen message on/off.
"IPB Display" Setting E
¶ Switches the IPB display on/off.
When "SOUND" is selected in "SET UP
MENU":
"SOUND" is to be selected when you want to set the
audio output method when system components are
connected using the digital audio output connector of
the player.
When the system is connected using the 6CH. OUTPUT
jacks of the player, also select "SOUND" to set the
speakers, audio output during DVD or VCD search,
dynamic range control function and audio filters.
EXIT MENU
Digital Audio
Dolby Digital
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
SOUND
7 On
7 Bitstream
7 Bitstream
7 Bitstream
7 On
7 Wide
7 Filter 60kHz
"Digital Audio PCM Down Conversion" SettingR
¶ Switches on/off the down-sampling conversion for
the digital signal output with a high sampling rate.
"Digital Audio Dolby Digital" SettingR
¶ Sets the Dolby Digital output.
"Digital Audio DTS" SettingT
¶ Sets the DTS output.
"Digital Audio MPEG" SettingY
¶ Sets the MPEG output.
"Speaker Setting"Y
¶ This setting is required when the 6CH. OUTPUT
jacks of the player is used in system connection.
"Audio During Search" SettingP
¶ Switches on/off the audio during search.
"Dynamic Range Control" SettingP
¶ Switches the dynamic range control function.
"Audio Filter" SettingŒ
¶ Sets the audio filters for protecting the connected
speakers.