Karcher WV 50 - Manual (Page 5)

English
5
Î Insert the charger delivered with the ap-
pliance into a proper socket.
Î Insert the charging cable plug to the
back of the appliance.
Note: During the charging process, the
charge/operating display blinks. Once the
battery is fully charged, it will be perma-
nently illuminated.
Î
We recommend unplugging the charg-
ing plug and the charger after the
charging process is complete (after ap-
prox. 3 hours).
Recharge the battery after finishing
your work.
Î Apply conventional window cleaner to
cleaning area.
Î Switch the appliance on, the charge/op-
erations display will illuminate.
Î Pull the appliance from the top to the
bottom to vacuum up the cleaning solu-
tion residue.
Note: Hard to reach areas can be vacu-
umed vertically or horizontally (limited are-
as).
Notes:
If the battery is losing its performance, the
charge/operations display will begin to blink
slowly and the appliance will shut off after a
certain time. In this case, recharge the bat-
tery.
Switch the appliance off after each cleaned
surface. This will increase your operating
time per battery charge.
Î Set the appliance on the support leg
(parking position) and switch it off.
Once the max. fill level (mark) of the dirt
water reservoir is reached, please empty
the tank.
Î
Turn off the appliance.
Î Pull off the lock of the dirt water reser-
voir and empty the tank.
Î Close the dirt water reservoir.
Charge the battery
Start working
Interrupting the work
Emptying the reservoir during oper-
ation