Finish up your work / clean appliance, Troubleshooting – Karcher WV 50 User Manual

Page 6

Advertising
background image

6

English

Î

Turn off the appliance.

Î

First, release the attachment with the
pull-off lips and remove it from the suc-
tion head, then release the suction
head and remove.

Î

Clean the suction head and the attach-
ment with the pull-off lips under running
water (do not wash in dishwater).

Caution: The basic appliance contains
electrical components. Do not clean this
under running water!
Î

Remove the dirt water reservoir, rotate
the lock and pull out.

Î

Empty the reservoir and rinse with clear
water. Close the reservoir again.

Î

Let the cleaned appliance dry prior to
assembly.

Î

Charge the battery.

Î

Store the appliance upright in a dry
room.

Check the charge/operations display:
Î

No signal or slowly blinking signal:
Charge the battery.

Î

With a rapidly blinking signal: Inform
your dealer.

Î

Clean the pull-off lip.

Î

Turn the upper pull-off lip around by
pulling it out to the side, turning it
around and reinserting it.

Î

Replace pull-off lip if required.

Î

Adjust the dosing of cleaning solution.

Î

Empty the dirt water reservoir (max.
3,3 oz. content).

To purchase replacement parts please visit
www.buykarcher.com

Finish up your work / clean

appliance

Storing the Appliance

Troubleshooting

Machine does not start

Streaks while cleaning

Water is leaking from the air louvers

Replacement parts

Advertising