Kompernass KH 2328 - Manual (Page 5)

- 3 -
• Make sure that the power cord never becomes
wet during operation.
• You may not open or repair the appliance ca-
sing yourself. Should you do so, safety is no lon-
ger assured and the warranty is void.
• Protect the appliance against drip and spray wa-
ter. Do not place any water-filled vessels (e.g.
flower vases) on the appliance.
Information on separating the
device from mains power
The RADIO/OFF/CD button on this device does
not completely separate it from the mains net-
work. In addition, the device uses power when
in standby mode. In order to completely sepa-
rate the device from the mains supply the plug
must be removed from the mains socket.
Fire hazard!
• Do not use the appliance near hot surfaces.
• Do not keep the appliance in places exposed to
direct sunlight, Otherwise, it may overheat and
become irreparably damaged.
• Do not leave the appliance unattended when in use.
• Never cover the ventilation slots of the appliance
while it is being used.
• Do not place open fire sources, such as for
example candles, on the appliance.
Danger of injuries!
• Keep children away from the connecting cable
and the appliance. Children frequently underesti-
mate the danger from electrical appliances.
• Ensure the appliance stands at a safe and secu-
re positioning.
• Do not operate the appliance if it has sustained
a fall or is damaged. Have the appliance che-
cked or repaired only by qualified technicians.
• Keep batteries away from children. Children can
put batteries into their mouths and swallow them.
Danger - Laser Beams!
The appliance is fitted with a “Class 1 Laser”.
• Never open the device.
• Never attempt to repair the device. There is
invisible laser radiation inside the device.
• Avoid all direct optical contact with the
laser beam, it could lead to serious eye
injuries.
Thunder storms!
Devices connected to mains power can be
damaged during a thunder storm. If there is a
thunder storm, always remove the mains plug
from the socket.
Information on voltage surges
(EFT/electrical fast transient)
and electrostatic discharges:
If the product does not work properly due
to electrical fast transient processes (voltage
surges) or electrostatic discharge, it must be
reset to restore normal operation. If necessary,
remove the plug from the power socket and
insert it again. The batteries (if used) must be
removed and reinserted.
Note:
Take note that the rubber feet of the appliance
could leave traces on painted, sensitive or trea-
ted surfaces. If possible, place an anti-slip ma-
terial under the feet of the appliance.
IB_KH2328_AR3984_LB4_EN 31.03.2008 11:38 Uhr Seite 3