Kompernass KH 2328 - Manual (Page 8)

CD Functions
Inserting a CD
• Select the CD function with the function switch.
• Fold the carrying handle back.
• To open the CD compartment, press down the
flap at the position marked with OPEN/CLOSE and
then release it.
The flap of the CD compartment opens upwards.
• Insert the CD, with the printed side upwards, in
the middle of the CD compartment. Thereby, en-
sure that the CD lies with its hole in the middle of
the cone of the turntable.
• To close the CD compartment, press down the
flap at the position marked OPEN/CLOSE until it en-
gages.
On the display after a short blinking of „--“ the num-
ber of titles on the CD is shown.
Removing the CD
• Press the button STOP and wait until the CD is no
longer spinning.
The CD may no longer be spinning when
you open the CD compartment. It could be
irreparably damaged.
• To open the CD compartment, press the flap at
OPEN/CLOSE .
• Remove the CD.
Starting playback
• Press the button PLAY/PAUSE .
In the display „PLAY“ is shown and the first title is
played.
Stopping playback
• Press the button STOP .
- 6 -
Interrupting/continuing playback
• During playback press the button PLAY/PAUSE .
In the display the word „PLAY“ flashes.
• To continue playback, press the button
PLAY/PAU-
SE once more.
Next/previous title
• To playback one of the forthcoming titles on a
CD, during playback press the button NEXT repe-
atedly, until the number of the desired title appe-
ars in the display.
• To playback one of the previous titles, during
playback press the button BACK repeatedly, until
the number of the desired tile appears in the dis-
play.
Title fast forward/reverse
• During playback press the button NEXT or the but-
ton BACK .
• Keep the button pressed until the desired point in
the title has been reached.
Repeat function (REPEAT)
With the repeat function you can repeatedly play-
back indivdual titles of a CD or all of them.
• To repeat individual titles, press the button
REPEAT .
Blinking on the display is RPT.
• To repeat all titles on a CD, press the button
REPE-
AT twice.
Shown on the display is RPT .
• To finish the repetitions press the button
REPEAT re-
peatedly until the RPT extinguishes.
Programme playing order
You can programme in a playback sequence for up
to 20 titles, in which the individual titles of a CD are
played back. This is only possible when the play
function has been stopped.
• Press the button
PROGRAM .
The indicator PRG01 blinks in the display for pro-
gramme position 1, the title which is to be played
first in the playback sequence.
• With the buttons
NEXT and BACK select the desired
title for programme position 1.
IB_KH2328_AR3984_LB4_EN 31.03.2008 11:38 Uhr Seite 6