Kawai CA 111 - Manual (Page 10)

Page
10
2
BASIC
OPERA
TION
2. BASIC OPERATION
This section provides the basic procedures for turning the power on, and performing with headphones.
Step 1
Plug the AC cord into the AC IN connector located at the rear of the
instrument.
Step 2
Plug the CA111 power plug into the electric wall outlet.
Step 3
Push the Power switch located on the right of the cheek block.
The LED above the control panel Volume knob will light up to indicate that the
CA111 piano is turned on.
Step 4
Use the Volume knob to set the volume to a comfortable listening level.
The volume knob controls the volume level of the speakers and the headphones.
Setting the volume knob to the half-way position is a good starting point.
y The CA111 piano is equipped with top speakers on the left and right sides of the
unit, behind the top board. To avoid damage to these speakers or other parts of the
CA111, do not place liquids such as water or coffee on or near these speakers.
Caution
Top speakers