Kawai CA 111 - Manual (Page 46)

Page
46
8
USB USA
GE
‘ NOTES ON USB USAGE
y When both MIDI jacks and the USB port are connected simultaneously, the USB port has priority.
y When connecting a USB cable to the CA111 piano, first connect the USB cable and then turn the CA111
piano power on.
y When connecting the CA111 piano to a computer via the USB port, there may be a short delay before MIDI
communications begin.
y If the CA111 piano is connected to the computer via a USB hub and the USB communication becomes
unreliable/unstable, please connect the USB cable directly to the USB port of the computer.
y Turning on/off the power of the CA111 piano while connected via USB, or disconnecting the USB cable
suddenly, may cause computer instability in the following situations:
while installing the USB driver
while starting up the computer
while MIDI applications are performing tasks
while the CA111 piano is communicating with the computer
while the computer is in energy saver mode
y If there are any further problems experienced with USB communication while the CA111 piano is connected,
please consult the instruction manual of your computer and double-check all connections and relevant
settings.
The USB-MIDI conversion board TID10000934 utilised in the CA111 piano is approved to
show the USB logo.
The USB logo can be used only for products approved by the USB-IF (USB Implements
Forum Inc.) test.
Ú “MIDI” is a registered trademark of the Association of Manufacturers of Electronic Instruments (AMEI).
Ú “Windows” is registered trademark of Microsoft Corporation.
Ú “Macintosh” is registered trademark of Apple Computer, Inc.
Ú Other company names and product names mentioned referenced herein may be registered trademarks or
trademarks of respective owners.