Kenwood DPX-302 - Manual (Page 31)

31
XD SERIES (En)
Operation
Recording preparations are required. §
(Steps 1 to 4)
1
Check that the CD player is in the
stop mode.
2
Select “Recording Options”.
3
Select “CD Direct Recording”.
4
Select the disc.
5
Start recording.
Recording of an entire CD
(CD DIRECT RECORDING)
Perform the following operation while the CD player is in stop mode to start recording at the same
time as the start of playback.
Convenient CD recording
÷ Recording of CD starts at the same time as playback.
÷ At the end of tape, the music is not recorded on the leader
tape portion. If you do not want any music to be
interrupted in the middle, refer to “Recording on TAPE”
and start recording of side B with the interrupted track.
§
To end recording in the middle
÷ Both the cassette deck and CD player stop.
+Scrolled display (CD Direct Recording)
+Scrolled display (Select Disc No.)
+Scrolled display (Press 'ENTER' to Start)
C D D i r e c t
D i s c N o . 1 S s e l e c t D i
P T r e s s ' E N
+Scrolled display (Recording Options)
R e c o r d i n g
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Program Play”
“Recording Options”
“Sound Options”
“Clock Options”
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Direct Recording”
“CD Program Recording”
If it is in play mode
MENU SELECT
SELECT
SELECT
ENTER
CD STOP key