Konka Group Z1 - Manual (Page 17)

17
TURNING ON THE CAMERA AND DISPLAYS
Press the main switch to turn the camera on. Pressing the switch again
turns the camera off.
Around the main switch is the mode switch. This switch is used to
change between the recording and playback modes as well as the
selecting the between the monitor and viewfinder display.
Recording mode (Monitor display) - the camera can record images
and the monitor is viewed directly.
Playback mode (Monitor display) - images can be played back and
edited. The monitor is viewed directly.
To use the viewfinder in the playback mode, press and hold
the flash mode button (1) and then press and hold the
information (i
+ ) button (2) until the monitor switches to the
viewfinder position.
Camera notes
Recording mode (Viewfinder display) - the camera can
record images and the monitor is viewed through the
viewfinder. The viewfinder has a built-in diopter. While
looking through the viewfinder, turn the diopter-
adjustment dial until the monitor image is sharp
1
2