Konka Group Z1 - Manual (Page 56)

56 A DVANCED RECORDING
AUTO DSP
Automatic Digital Subject Program Selection can be
temporarily disabled in the auto-recording menu. When
disabled, the program exposure mode is active. If the
position of the exposure mode dial is changed or the camera
is turned off, Automatic Digital Subject Program Selection is
activated.
Drive mode
Image size
Quality
Auto DSP
Digital zoom Single
2048x1536
Standard
On
Off
DIGITAL ZOOM
The digital zoom must be activated separately in the auto-recording, Digital Subject
Program, and P, A, S, and M exposure-mode menus. The digital zoom is activated in
section 3 of the P, A, S, and M exposure-mode menu (p. 44).
The digital zoom extends the power of the telephoto position of the optical zoom by up
to 4X in 0.1X increments. The transition between the optical zoom and digital zoom is
seamless. When the digital zoom is active, the image magnification is displayed on the
monitor and the focus frames change to a single focus area. Because of the degree of
magnification, the use of a tripod is recommended.
The digital zoom is operated by the
zoom lever (1). Slide the lever right
(T) to zoom in to the telephoto
position of the lens. When the digital
zoom activates, the image
magnification will be displayed on the
monitor. Turn the lever left (W) to
zoom out.
Digital zoom images are interpolated
to the set image size. Some loss of
quality may be evident with images
taken with the digital zoom.
1
Magnification