Knoll HDP460 - Manual (Page 22)

22
Language: allows you to select a language for the onscreen display.
•
Custom key: allows you to assign a different function to the Custom
key on the remote, allowing you to quickly and easily use the effect. Highlight an effect and
press
Select to choose a different one.
•
Blank Screen: displays a solid blank image.
•
Freeze: takes a snapshot of the projected image. If you’re watching video, the source video
continues to run but the image is frozen.
•
Source Info: the default effect. It opens a window with projector and source information.
•
Service Info: opens the Service info window.
•
Source 4: selects source 4 (by default, Source 4 is the Composite input). This gives you four
direct source options on the remote. See page 20.
Service: To use these features, highlight them and press
Select.
Factory Reset: restores all settings to their default.
Reset Lamp Hours: resets the lamp hours used in the
Service Info menu to zero. Do this only after changing the
lamp.
Test Pattern: displays a test pattern. To display test patterns, first you must assign Blank Screen
to the Custom key (page 17), then click the Test pattern check box in the Service menu to turn
the option on, exit the menus, then press the
Custom button on the remote. To select the
patterns, use the up/down arrows on the remote or keypad. To exit the test patterns press
the Custom button.
Blue Only: turns off the Red and Green
portions of the input, allowing you to properly
adjust the color balance with a SMPTE color
bar pattern.
HDMI DDC: turns off the EDID extension.
Some graphic cards cannot recognize the
projector’s EDID. Uncheck this box if you
have trouble using HDMI or DVI sources.
Service Info: provides information about the
projector’s software, serial number and lamp.
Source Info: provides information about the active source.
Service Code: only used by authorized service personnel.