Konica Minolta C352 - Manual (Page 22)

Created by Hotline Support
Konica Minolta Hotline Support (UK)
22
C253/C353/C451/C550/C650 with the Fiery IC-409
There are 2 ways of configuring the C253/C353/C451/C550/C650 with the
IC-409 attached.
Please make sure you check which configuration you have
before you commence setup of scanning.
Configuration 1
* There will be a short black crossover cable connected from the top LAN connection
of the copier (Figure 1), to the COPIER connection on the Fiery (Figure 2).
* The LAN cable for the network will be plugged in to the LAN port on the Fiery.
The machine will have two IP addresses. One for the Fiery and one for the main
body. When browsing the web interface, you need to use the correct IP address for
what you want to browse.
The IP address of the Main Body can be found by printing a Configuration Page from
the Fiery. It cannot be found under the Network Settings on the main body of the
machine. At the machine, follow the steps below:
1) Press the Utility\Counter button
2) Press Controller Details on the touch screen
3) Press Menu
4) Press the button next to Print Pages and then the button next to Configuration
Figure 1
Figure 2