Kenwood Sovereign VR-5900 - Manual (Page 9)

3
Chapter One : Connecting Your Devices
Connections
Noting Your Devices
Use this table and the diagram on the preceding page to
plan your connections before you make them, or use it to
record your connections as you make them. You will need this information later, when you set up your
PowerTouch (see “Identifying Devices For PowerTouch Con-
trol” on page 40). Recording this information now will save
you additional trips behind your home entertainment cabi-
net. You will fill in the Setup Code column when you are
setting up PowerTouch.
Jack Set Device Manufacturer Model # Setup Code
PHONO
CD1
MD/TAPE1
CD2/TAPE2 MONITOR
CD-R
VIDEO1
VIDEO2
VIDEO3
VIDEO4
DVD
MONITOR OUT
(TV on PowerTouch)
When playing Dolby Digital *1 or DTS-encoded software in
multichannel configuration, the connected audio signal
should be the digital signal.
*1 When playing a LaserDisc recorded in the Dolby Digital
format, connect the AC-3 RF output to the receiver (See page
26).