Kompernass KH 4010 - Manual (Page 4)

4. Cleaning and Care
ƽ
Danger:
• Before cleaning the desk lamp:
- Switch off the desk lamp,
- pull out the plug from the power
socket and
- let the desk lamp cool down
completely.
• Never immerse the appliance in water
or other liquids while cleaning.
➭ Clean the desk lamp with a dry,
fluff-free cloth.
To avoid causing damage to the desk
lamp, never use solvents for cleaning.
5. Disposal
Do not dispose of the device in
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your
communal waste disposal facility.
Observe the currently valid regulations.
In case of doubt, consult your waste
disposal facility.
ƽ
Warning:
Before disposing of the appliance, you
can prevent accidents to children by
detaching the power plug, thus rendering
it unusable.
6. Service
Kompernass Service Ireland
c/o Irish Connection
41 Harbour View
Howth, Co. Dublin
Tel.: 087-99 62 077
Fax: 18398056
e-mail: [email protected]
4
3. Start-up
Insert a lightbulb
ƽ
Warning:
• Always use 1 lighting element with
an E14 thread and max. 25 W.
• Before inserting or replacing the
lightbulb:
- Switch off the table lamp,
- pull out the plug from the power
socket and
- let the desk lamp cool down
completely.
➭ Turn the lighting element carefully
in the socket and see to it that it is
properly fitted.
The lighting element is not included in
the delivery.
➭ Guide two of the three clips into the
opening of the lamp shade.
➭ Press the base of the lamp into the
direction opposite to that of the third
clip in order to insert it into the lamp
shade (fig. 1)
➭ Screw in the three supplied metal feet
into the threads provided for the pur-
pose at the bottom of the lamp base
(fig. 2).
Setting up and switching on
➭ Place the desk lamp on an even
base. Keep illuminated objects at
a minimum distance of 0.5 m.
➭ Connect the power plug to the
power socket.
➭ Switch on and off the desk lamp
at the switch fuse.
fig. 1 fig. 2
IB_KH4010_egg.qxd 01.02.2007 12:04 Uhr Seite 4