Kenwood DVT-6200 - Manual (Page 11)

11
Preparations
DVT-6200 (EN/K,E,X)
System Connections
Caution:
Do not plug in the power lead until all connec-
tions are completed.
Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including pro-
jection) equal or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
Malfunction of microcomputer
If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to “In case of
difficulty”. Y
Loudspeakers
Front
speaker L
Subwoofer
Surround
speaker
L
Front
speaker R
Surround
speaker
R
Center speaker
Excessive insertion of the cable
can cause defective contact.
Note Note Note
1 2 3
03.7.8, 11:05 AM Page 11