Delay time setting, How to set the delay time, Set up functions – Kenwood DVT-6200 User Manual

Page 31: Speaker setting

Advertising
background image

DVT-6200 (EN/K,E,X)

Set Up functions

31

Preparations

Speaker setting

1 Press SET UP key.

Delay time setting

L

S
R

S

L

R

C

SW

R

L

C

S

The ideal listening position for 6-channel surround playback is the point at equal distance from all speakers.
By setting the delay time for the center and surround speakers, this item realizes the ideal listening position virtually.
(The center and surround speakers can be set as if they are laid out on the dotted line circle shown below.)

Ideal center speaker position

Ideal surround
speaker position

Blinks

2 Press the TRIM (5/) keys to se-

lect the speaker distance.

3 Press SET UP key.

4 Press the TRIM (5/) keys to se-

lect the speaker distance.

How to set the delay time

Delay time setting sets the delay time converted to the
distance from the speaker to the listening position.

The front speakers (L/R) can be adjusted between 40 feet
(12 m) and 3 feet (0.9 m).
The range which can be set for the center speaker (C) and
the surround speakers (LS/RS) duffers according to the
setting for the front speakers. A longer distance than for
the front speakers can not be set.

This operation is performed following the adjust-
ment of the speaker level setting on page 30.

Return to the original display is made when no operation
is performed for about 5 seconds.

Feet indication

Meter indication

The process advances to center speaker adjustment
when the SETUP key is pressed.

Repeat

3 and 4

4

4

4

4 in the same way to adjust the

surround speakers.

÷ Press the SET UP key to end speaker setting.

03.7.8, 11:06 AM

Page 31

Advertising