Kenwood KRF-V7090D - Manual (Page 6)

6 EN
ENGLISH
L
SL S SB SR
C R
SP MUTE
6CH INPUT
DIGITAL DOLBY DIGITAL EX
DOLBY EX
DOLBY PL II x
DTS 96/24
ES MATRIX6.1
ES DISCRETE6.1
STEREO
96kHzfs
LOUDNESS
NEO:6
SLEEP
CLIP
AUTO DETECT
AUTO
MEMORY
STEREO
TUNED
SW
LFE
A B
DSP MODE
PTY
RDS
VOLUME CONTROL
DOWN UP
MUTE
AV AUX/GAME
S VIDEO VIDEO L-AUDIO-R
LISTEN MODE MULTI CONTROL
SETUP TONE SOUND
MEMORY BAND
TUNER PHONO CD/DVD DVD/6CH
MD/TAPE VIDEO 3 VIDEO 2 VIDEO 1
ACTIVE EQ BASS BOOST LOUDNESS DSP STEREO INPUT MODE DIMMER
DSP
96kHz-fs
ACTIVE EQ
DOLBY DIGITAL
DTS
LOUDNESS
A SPEAKERS B
PHONES
AUTO/MONO
Names and functions of parts
Main unit
Display
*Input channel indicators
Output channel indicators
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
Frequency display
Input display
Preset channel display
Surround mode display
Speaker
indicators
RDS indicators
MUTE
indicator CLIP
indicator Input mode
indicators Listen mode indicators
SLEEP indicator
1 (POWER ON/STANDBY) key &
Use to turn the power ON/STANDBY.
Standby indicator
2 SPEAKERS A/B keys )
Use to turn the A/B speakers on or off.
3 ACTIVE EQ key ¡
Use to select ACTIVE EQ setting.
4 BASS BOOST key ¡
Use to select BASS BOOST setting.
5 Surround LED (lighting-emitting diode)
indicators
DSP mode indicator
⁄
Lights when the receiver is in the DSP mode.
96kHz fs mode indicator
›
Lights when the receiver is in the 96kHz
LPCM playback mode.
ACTIVE EQ mode indicator
™
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL mode indicator
⁄
Lights when the receiver is in the Dolby
Digital mode.
DTS mode indicator
⁄
Lights when the receiver is in the DTS mode.
LOUDNESS indicator
¡
Lights when the LOUDNESS is ON.
6 LOUDNESS key ¡
Use to switch the status of LOUDNESS.
7 DSP key º
Use to select any of the DSP mode.
8 STEREO key º
Use to switch the listen mode to STEREO.
9 INPUT MODE key 8
Use to select the Input mode.
0 DIMMER key
Use to select the REC MODE. £
Use to adjust the brightness of the display.
¤
! VOLUME CONTROL knob )
@ MUTE key ¡
Use to temporarily mute the sound.
# PHONES jack ¡
Use for headphone listening.
$ Input Selector keys )
(DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
Use to select the input sources.
% SOUND key ¤
Use to adjust the sound quality and the
ambience effects.
^ BAND key ¢
Use to select the broadcast band.
& AUTO/MONO key ¢
Use to select the auto or manual tuning
mode.
* TONE key ¡
Use to switch the status of TONE control.
( MEMORY key ∞
Use to store radio stations in the preset
memory and to start the Auto Memory.
) SETUP key &
Use to select the speakers' settings etc.
¡ keys &
Use for selection adjustments during sound,
set up and preset channel functions.
™ MULTI CONTROL knob
Use to control a variety of settings.
£ LISTEN MODE knob º
Use to select the listening mode.
¢ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks ^
∞ AV AUX/GAME key )
Use to switch the input to AV AUX or GAME.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition,
the system can be turned ON by remote control unit.
* Input channel
indicators
Input channel indicators
light up according to the
incoming audio signals.
"S" indicator will light up
when the surround com-
ponent of the audio sig-
nals is only 1 channel.
05.2.8, 4:01 PM 6