Battery installation – Kawasaki J5248 User Manual

Page 11

Advertising
background image

J5248pr-0920

11

IMPORTANT! Use only a Power Wheels

®

12 volt lead-acid

rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least 18 hours
using the enclosed Power Wheels

®

12 volt charger before operating

your vehicle for the first time. Charge the battery for at least
14 hours after each use of the vehicle. Never charge the battery
longer than 30 hours. Failure to follow these instructions may
damage your battery and will void your warranty.

• Press the tab on the rear of the seat and lift to remove.

Tab

• Plug the motor harness connector into the battery.

Power Wheels

®

12 Volt Battery

Motor Harness

Connector

• Carefully lower the battery into the battery compartment.

The battery retainer slides over the battery to secure it.

BATTERY INSTALLATION

1

2

3

Seat

• First, insert the tab on the front of the seat into the slot toward the

front end of the vehicle A .

• Then, insert and “snap” the tab on the rear of the seat into the slot

in the rear of the vehicle B.

Rear Tab B

Front Tab A

LEFT SIDE VIEW

4

Battery Retainer

Advertising